Free Shipping. The units are in good condition with some scratches. All the hard drives have meen removed and there are no hard drive mountain screws. There are 3 As and 2 s. Below are the serial numbers. No refunds. No Returns. This was pulled out of building when we replaced it with new equipment. Auction is for everything you see in the photos. I don't know anything about the equipment.
But cosmetically it is in very good condition. Was used as a DEMO for a start-up company that went out of business years ago. Seems to be in overall great shape cosmetically but there is no way i can test it other than powering it on which it turned on just fine I opened the case just to make sure both hard drives are still in tact which they are.
SOLD as is and no returns. I'm accepting PayPal as payment. Once payment is made. Package will ship right away. If payment is not received within 4 days after auction ends, a non-bidder eBay email will be sent. Please review my positive feedback's. If you have any questions, please email me through this auction. Thanks and Happy Bidding! The unit has been fully tested. The hard disks are new. In picture 2. You can see the drives before installation and in picture 3 a screen shot showing only one 1 hour for testing Unit shows minimal wear.
Pictures are of the actual unit up for sale. Also available. Compared to a conventional algorithm. The data compression ratio has improved approximately 1. Depending on object and compression mode. Simple and instinctive.
Eight 8 directly connected Panasonic dome cameras can be controlled from the front panel. The GUI based menu screen enables quick set up for flexible, more complex operations. Under the"All-in-One Solution" concept.
All the vital recording components and features are condensed into one unit. With one single unit. Unprecedented, highly reliable surveillance recording is possible in a wide range of applications. New algorithm divides entire screen into high and low frequency elements to reduce artificial distortion and noise compared to conventional compression.
In addition. The mode-A compression data ca. This item is in the cosmetic condition shown- the top is loose and the knob is missing. The auction includes only what is shown. Powered by The free listing tool. List your items fast and easy and manage your active items. The photos are photos of the actual item you will receive and not stock photos. Please note though the disk recorder does not have a hard drive or a power cord. It also has the small plastic cover missing from the right hand side that would cover up the outputs.
Controller has the cords. Item is as listed. This was used by us and was working in our facility up until recently when we got a new system. All in one solution. In the case of an emergency, emergency recordings will be given a higher priority than other recording modes by operating an external switch. At an event occurrence, such as when an alarm signal is supplied, the recording mode quality and recording rate can be changed to high quality to record pictures. It is possible to start recording automatically when motion is detected in a shooting area.
While monitoring a multi-screen, each camera picture will be displayed as a moving image. Up to 32 users can be registered. Using a coaxial cable also compensates for transmission loss. Blinks when an alarm occurs, and lights steadily when the activated alarm is reset automatically.
Pressing this button cancels alarm activation, and returns the system to the condition before the alarm was activated. Lights up when the schedule recording is set, and blinks while the schedule recording is being performed. Pressing this button switches the monitor. This button lights up when monitor 1 is selected, and goes off when monitor 2 or the VGA monitor is selected. Pressing a button displays live or playback images of the selected camera. The LED in the button indicates the status as follows.
Green: When a button is lit green, the currently displayed image on the monitor is live from the respective camera. Orange: When a button is lit orange, the image from the respective camera is recorded.
Blue: When a button is lit blue, the currently displayed image on the monitor is live from the respective camera and is also recorded. When the shift button is lit, these buttons work as the toggled function buttons. The buttons available as the toggled function buttons will light green when the shift button is lit. Refer to pages 45 and 23 respectively. Refer to pages 46 and 28 respectively.
Moves a camera to the preset position, or activates the auto function of the camera. Starts recording. To stop recording, press this button down for 2 seconds or more. Displays the setup menu, or turns back to the previous page of the setup menu, etc. Lights when the selected camera was not available to operate because another user is operating it using a controller or a PC via a network. In this case, wait until this indicator goes off.
Connect the S-video input connector of a VCR with this connector. Connect the video input connector of a VCR with this connector. Connect system cameras or combination cameras to these BNC connectors. Refer to page 72 for the impor-. These BNC connectors supply video signals looped through the video input connectors. Refer to page 72 for the important notice about the BNC cables to be used. Connect monitors to these BNC connectors.
Connect a VGA monitor with this connector. Connect an external device such as a sensor or a door switch with this D-Sub pin connector. Connect a control switch with this D-Sub pin connector when controlling this unit using an external device, or when controlling an alarm device such as a buzzer or a lamp. Fix the cables with this cable clamp to prevent disconnection or unstable connections that may cause recording failures or an unstable system.
The negative circled numbers indicate the default positions of camera title q, time w and event display e. Note: The camera title will be displayed with 16 characters 2 lines: 8 characters per line. The position of an event display will be symmetrical to the position where the time is displayed. When the time is displayed at the lower left of the screen, an event display will be displayed at the upper right corner of the screen.
The event display will be displayed differently as follows depending on which event has occurred. COM- : When a command alarm has occurred. TRM- : When a terminal alarm has occurred. Note: Refer to page 49 for further information about event types and event actions.
The task bar consists of the main bar w - A , the left bar w - B , and the right bar w - C. Displays the status only on the main bar, and does not display information on the left bar and the right bar. Note: Mode 2 and Mode 3 are graphic operated. When using the optional extension unit WJ-HDE series , turn on the power of this unit after turning on the power of all extension units. The startup splash image below will be displayed on monitor 2 and the VGA monitor during the system check. When the auto login is off, the login window will be displayed if any button on the front panel of this unit is pressed after the system check.
Go to step 3. When the auto login is on, live images will be displayed after the system check. Refer to page for further information. Rotate the jog dial to select a character to be entered in the cursor position.
Use the same method to enter or edit characters attached to images. Refer to page 59 for further information. It is recommended to change the password for an administrator periodically.
If the authentication login window is displayed, enter the user name and password. When not authenticated, the authentication login window will be displayed again. It is recommended to check the clock periodically and put the clock right if it shows the wrong time. When recording is being performed, press the REC button for 2 or more seconds. Recording will stop and the indicator on the REC button will go off.
When playback is being performed, press the STOP button. Refer to a system administrator about the required settings for manual recording. The indicator on the button will light and recording will start. Images from all the connected cameras will be recorded with the default setting. It is possible to record only images displayed on monitor 2 and the VGA monitor by changing the settings. When recording with higher priority than manual recording is performed, manual recording will not be performed until this recording finishes.
When the supply of the video input signals to the camera channel is resumed, manual recording will be performed automatically.
Start recording manually using an external switch at an emergency event occurrence. Emergency recording is the highest priority. Refer to a system administrator about the settings. For example, install an external switch at the reception counter, and start recording with it when a suspicious individual appears. Refer to a system administrator about the required settings for emergency recording.
Emergency recording will be performed even when this unit is recording in other recording modes. When the recording duration set in advance has passed, recording will stop automatically. With the default setting, recording will stop automatically after recording for 10 seconds. Recording duration of emergency recording can be set as follows. Refer to a system administrator for further information. Go to step 2 if not necessary. The pressed camera selection button will light green or blue and the respective live images will be displayed.
First playback after login: The latest recorded image will be played. With the default setting, playback will start 5 seconds before the start time of the latest recorded image. The start time can be selected from the following:. Other than those above: Playback will start from the end point of the recorded image played last time. Rotating the jog dial during playback will skip to the next or previous recorded image.
Rotating the jog dial clockwise will skip to the start time of the next recording and start playback, and rotating it counterclockwise will skip to the start time of the previous one. Rotating the jog dial counterclockwise at a point shortly after the start time of the recording will skip to the start time of the previous recording.
If there is no next or previous recorded image, current playback will continue. Camera selection button 1: 4-split screen Camera selection button 2: 7-split screen Camera selection button 3: 9-split screen. Time of point A. Playback between point A and B will start and keep playing repeatedly. The time of point A and B will be displayed during playback. Time of point A and B. Note: When the clock of the unit has been changed by editing the time and date settings or by the auto time adjustment function, overlapping of the time ranges of the images recorded before and after the time adjustment could occur.
This is a normal operation. Note: External recording devices can be used as a copy area for images recorded on the hard disk. It is impossible to record images on the external recording devices directly. Recording area in the built-in hard disk of this unit. Recorded images by manual recording page 20 or event recording will be stored in this area. There are 3 ways to search for a recorded image and play it when "HDD normal area" or "event recording area" is selected as the recording area.
Recorded images will be copied in this area. There are 2 ways to search for a recorded image and play it when "HDD copy area" is selected as the recording area. COPY 1. COPY 2. Press the SET button to determine the selection. Refer to page 28 for further information about the recording event list window. Refer to page 32 for further information about the copy data list window.
It is possible to play recorded images from a designated time and date without stopping recording. The time and date designation window will be displayed on monitor 2 and the VGA monitor.
Select the time and date using the jog dial. To move the cursor, use the arrows button A B. When there are images recorded after the entered time, the oldest recorded image after the entered time will be played. When there are no images recorded after the entered time, the newest recorded image before the entered time will be played. Note: Playback images will be displayed on a single screen on monitor 2 and the VGA monitor. To play in a multi-screen, switch to a multi-screen after starting playback.
Display a list or a thumbnail of recording events, and select the desired recording event from them to play it. It is possible to search using the following filters:. The camera channel of the recorded image will be displayed.
The recorded image of. The first several characters of text information will be displayed if the image has text. The search filter will be displayed.
A filter of the currently displayed list will be dis-. Number of the listed data. The recorded image of the displayed camera channel will be played on a single screen.
The recording mode also will be displayed. Number of the listed data: The number of the listed data will be displayed. In this case, the thumbnail display may not function properly. The recording event list window will be displayed on monitor 2 and the VGA monitor.
Use the arrows button C D to switch between displaying the list window and the thumbnail window alternately. When a search filter is selected, the respective search filter window will be displayed.
Move the cursor using the arrows button and rotate the jog dial to enter the time and date. Note: When operating the system controller, select a camera channel using the numeric keypad.
In this case, it is impossible to select 10 CH to 16 CH. Move the cursor to select the recording event refer to page 28 using the arrows button C D and rotate the jog dial to ON.
When events occurred successively, the contents of the event log and the recording event list will not always match since the unit continues to record the first occurring event.
Display a list or a thumbnail of copied recorded images Copy Data , and select the desired copy data file from them to play it. The time when recording of the source of the copied recorded images had started will be displayed. The camera channel of the copy data file will be displayed. Camera channel. Number of the listed data Always "--" is displayed. The recorded image of the. The recording mode also. The copy data file list window will be displayed on monitor 2 and the VGA monitor.
Search for a motion detected time and date from all the images recorded in all the recording modes, and display a list or a thumbnail of the results. It is possible to filter by camera channel, time and date, detection area or search mode, to list the time and date of events that were recorded when motion was detected. The motion detection area setup window will be displayed. Note: If no image was recorded in the time range set in step 3, the motion detection area setup window will not be displayed when the SET button is pressed.
Press the SET button to determine the selected point as the start point of the motion detection area. Press the SET button to determine the selected point as the end point of the motion detection area. It is possible to set up to 4 motion detection areas by repeating steps 6 and 7. Add to Favourites. Download as PDF. Overview View all the pages Comments. Page 1. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No.
0コメント